SM5522

Acryl-R 5522 10.1 oz Cartridge 2016-04-11 [MOCKUP]

Acryl-R® SM5522 is a one-component, solvent release acrylic sealant. It is a non-corrosive sealant with excellent adhesion to PVC, aluminum, glass and a variety of painted surfaces without priming. It remains ductile in the presence of ultraviolet and infrared radiation. Can be used for sealing flashing joints, which are mechanically fixed.

FEATURES

  • Remains permanently elastic
  • Excellent adhesion to clean GALVALUME®, GALVALUME PLUS®, ACRYLUME®, ZINCALUME®, Kynar 500®, PVC, polyvinyl fluoride and siliconized polyester painted metal surfaces
  • Elongation (ASTM D412) min. 200%
  • Service Temperature Range 0°F to 180°F
  • Peel Strength 5 p.i.w. AAMA 800-92

 PACKAGING

  • 10.1 oz. Cartridge (30 Cartridges / Case)

COLOR

  • Clear

SM5430

Acryl-R 5430 10.1oz Cartridge 2016-04-11 [MOCKUP]

Acryl-R® SM5430 Roof Sealant that is a high performance, high solids, non-skinning, non-drying standing seam roof (SSR) sealant based on a unique elastomer that provides a non-stringy consistency and excellent resistance to severe environmental conditions of heat, cold and moisture. Specifically formulated for precise application into concealed panel joints for roll forming lines (standing seam roof panels). It has excellent cut-off characteristics and is not stringy or messy to apply. It is also designed for sealing the warm side of concealed exterior polyurethane foam panels to form a vapor barrier seal. It is formulated without asbestos fillers.

FEATURES

  • Excellent adhesion to oily GALVALUME®, GALVALUME PLUS®, ACRYLUME®, ZINCALUME®, Kynar 500®, aluminum, aluminized steel, polyvinyl fluoride and siliconized polyester painted metal, concrete, FRP and glass
  • Remains permanently soft and tacky
  • Engineered for cold storage (low temperature) applications
  • Sealant will easily engage and transfer to male joint
  • Factory-caulked panels can be erected in the field up to six months after factory caulked
  • Minimal Shrinkage
  • No cracking or loss of adhesion at -60°F
  • Service Temperature Range -60°F to 200°F
  • Application Temperature Range 10°F to 120°F
  • Will resist fungal attack and not support mildew growth
  • Excellent for sealing between dissimilar metals to prevent electrolysis

 PACKAGING

  • 10.1 oz. Cartridge (30 Cartridges / Case)
  • 5 Gal. Pail
  • 55 Gal. Drum

COLOR

  • White

APPROVALS

  • Federal Specification TT-C-1796A, Type I, Class A
  • ASTM E1680 Air Infiltration
  • ASTM E1646, Water Penetration of Exterior
  • Roof Panel Systems by Uniform Static Air Pressure Difference, passes no water leakage
  • USDA acceptable